Aluminum is one of the most used materials in the world, and aluminum components are found in all walks of life. This includes aerospace components and parts for construction, process equipment, as well as electrical components and automotive manufacturing.There are several different ways to mold pa

Aluminum alloys are mainly used as structural materials in aircraft, such as skins, frames, propellers, fuel tanks, wall panels and landing gear struts. The application and development of aluminum alloys in aerospace can be divided into several stages: in the 1950s, the main goal was to reduce weig

Aluminum alloys can be divided into two categories: one is deformed aluminum alloys, which are used for processing semi-finished products such as plates, strips, foils, tubes, bars, shapes, wires, powders, and forgings; the other is cast aluminum alloys, which are used for casting various Castings a

1. Plus direction intensityDuring the automotive aluminum forging process, through strict control of mechanical deformation of heating metals, the expected, uniform grain size and flow characteristics can be obtained. Car aluminum forging parts are usually prepared to improve branches and eliminate

Aluminum alloys can be heated before forging with various heating equipment, such as resistance furnaces, gas furnaces, fuel furnaces, inductive heating devices, and dance particles.

Forging heating requirements1. Under the temperature and internal stress allowed by metal materials, it is quickly heated to the predetermined temperature to improve efficiency and save energy.2. Try to reduce the absorption of harmful gases such as oxygen, hydrogen, and nitrogen in heating metals,

An important part of ensuring the quality of thermal treatment is the uniformity of the forging temperature temperature. For most low -alloy steel quenching. The temperature accuracy of the Antidization can be controlled within the range of ± 15 ° C. For thermal treatment of high -intensity aluminum

The preparation of aluminum alloy forgings before forging includes the selection of raw materials, calculation, blanking, heating, deformation, design of equipment and molds. Before forging, the lubrication method and lubricant should also be selected.Forging materials have a wide range of surfaces,

Non-destructive testing refers to the method of inspecting and testing the specimen without damaging the specimen, also called non-destructive testing. With the development of modern science and technology, laser, infrared, microwave, liquid crystal and other technologies have been used in the field

Kunshan Southwest Aluminum Forging Co., Ltd. in order to maximize the savings of production and transportation costs of customers, to meet customer needs. The quality policy of "quality-oriented, reputation-oriented, excellence, continuous improvement" has consistently provided customers with produc

Inspection is divided into appearance quality inspection and quality inspection. The inspection of appearance quality is generally a non-destructive inspection, which can be inspected by the naked eye or a low-magnification magnifying glass, and the method of flaw detection is adopted. As for the in

1. The forging process includes: cutting the material to the required size, heating, forging, heat treatment, cleaning and inspection. In small-scale manual forging, all these operations are carried out in a small space by several forges. They are all exposed to the same hazardous environmental and