Summary of Improvement Measures for Industrial Aluminum Profile Extrusion Processing Technology

Strictly control the quality of raw materials:

In order to achieve good quality control in the extrusion process of industrial aluminum profiles, it is necessary to optimize the process and analyze possible problems during the implementation of the project. In order to be practical and targeted, improvements and enhancements should be made to the technology and equipment in the process steps. During this period, controlling the quality of mold raw materials for aluminum extrusion processing can effectively ensure the processing quality of industrial aluminum profiles. For certain raw materials with surface defects, they should be eliminated and repaired.    

For raw materials that may have internal defects, timely ultrasonic testing is required. Raw materials that do not meet the requirements cannot be allowed to enter the next processing step.

Improve employees' operational skills and work enthusiasm:

On the basis of clarifying the non squeezing duration, further increasing the number of employee training sessions and adjusting the implementation methods of employees in their work can allow outstanding employees with high operational skills in the enterprise to provide operational explanations to other employees. Further improve the accuracy of aluminum profile extrusion processing. At the same time, measures for assessment and selection will be added during this period to improve employees' work enthusiasm. Employees who have the best squeezing effect and the shortest mold changing time during the squeezing process will be rewarded accordingly.

Strengthen post quality inspection work:

The quality impact caused by the low progress of the work can be reviewed and avoided in future quality inspection work, providing corresponding convenience for polishing. In the actual production process, further quality inspection should be carried out on the extrusion processing tools of aluminum profiles. Firstly, the line cutting allowance should be determined, and the error should be controlled within a slight range as much as possible, so that the later stages can proceed as scheduled.    

The main purpose of doing this is to avoid improper working angles during the polishing process. The final impact is on the actual processing of aluminum profiles, and real-time detection of the work to be done during this process is necessary to avoid defects in the actual processing.    

Not only in this stage, but also in all of these stages, it is necessary to pay attention to the quality inspection of the semi-finished or final products after each stage of processing. For those that do not meet the quality standards, they need to be repaired or eliminated.