Analysis of the main process flow and process characteristics of aluminum extrusion processing

Overview of Aluminum Profile Extrusion Processing Process Flow:

The basic technological process of aluminum profiles during extrusion processing is: 1. Heating the aluminum rod. 2. Squeezing operation. 3. Cold bending straightening. 4. Sawing of aluminum profiles. 5. Aging treatment of aluminum profiles. After step 5, the further processing of aluminum profiles is divided into two aspects: packaging and warehousing, and transferring to various surface treatment factories.

Characteristics of Aluminum Profile Extrusion Processing Technology:

There are many processes involved in the extrusion processing of aluminum profiles, each with its own unique role, which has a significant impact on the final quality of the aluminum profiles. And from the perspective of the existing process flow, the role of each link is irreplaceable. It can only be said that further improvements can be made to the processing technology of each link, and cannot be omitted. Due to the numerous stages involved, any errors can have a certain impact on the production of the final profile, and defects may occur in each stage. However, in more mature stages of the process, the probability of defects occurring is lower. The part that affects the quality of aluminum profile processing technology is the weaker part of the process, such as the aging treatment and heat treatment parts. In the actual extrusion process, special attention should be paid.