 |
Aluminum 2017 Seamless Pipe for Architecture Industry
| Quantity: | |
|---|---|
Introduction for 2017 aluminum semaless pipe
2017 aluminum alloy is a high-strength heat-treatable alloy, which contains copper as the major alloying element. It is often used in aerospace, transportation, and structural applications. One of the primary forms of aluminum 2017 is seamless tubes, which offer impressive mechanical properties and corrosion resistance.
Chemical Composition:
The chemical composition of aluminum 2017 is as follows:
- Copper (Cu): 3.8-4.9%
- Magnesium (Mg): 0.4-0.8%
- Iron (Fe): 0.7% max
- Silicon (Si): 0.2-0.8%
- Manganese (Mn): 0.4-1.0%
- Zinc (Zn): 0.25% max
- Titanium (Ti): 0.15% max
- Chromium (Cr): 0.04-0.35%
- Aluminum (Al): balance
Mechanical Properties:
The mechanical properties of aluminum 2017 vary depending on the heat treatment process. In general, it has excellent strength, toughness, and hardness. Here are some of the important properties:
- Ultimate Tensile Strength: 430 MPa
- Yield Strength: 390 MPa
- Hardness (Brinell): 120
- Elongation at Break: 12%
Applications of 2017 seamless aluminum tube
Aluminum 2017 seamless tubes have several applications in various industries. Some of the notable applications include:
- Aerospace: It is widely used in the aerospace industry to manufacture structural components. Its high strength-to-weight ratio makes it ideal for aircraft parts that require strength and durability.
- Transportation: Aluminum 2017 seamless tubes are used in the manufacturing of transportation systems such as trucks, buses, and trains. It is also used to produce bicycle frames and other lightweight vehicles.
- Marine: It is used in marine applications such as boat building, shipbuilding, and offshore structures. Its corrosion resistance properties make it ideal for these applications.
- Structural: Aluminum 2017 seamless tubes are used in the construction of building facades, bridges, and other architectural applications. Its high strength and lightweight properties make it an ideal material for such applications.
Conclusion:
Aluminum 2017 seamless tubes offer exceptional properties that make them ideal for various applications. They are highly resistant to corrosion, have high strength, and are lightweight. The chemical composition of aluminum 2017 consists of copper as the primary alloying element, which gives it higher strength and toughness. Its mechanical properties are impressive, with high tensile strength and elongation at break. In conclusion, Aluminum 2017 seamless tubes have a broad range of applications, including aerospace, transportation, marine, and structural industries.
Introduction for 2017 aluminum semaless pipe
2017 aluminum alloy is a high-strength heat-treatable alloy, which contains copper as the major alloying element. It is often used in aerospace, transportation, and structural applications. One of the primary forms of aluminum 2017 is seamless tubes, which offer impressive mechanical properties and corrosion resistance.
Chemical Composition:
The chemical composition of aluminum 2017 is as follows:
- Copper (Cu): 3.8-4.9%
- Magnesium (Mg): 0.4-0.8%
- Iron (Fe): 0.7% max
- Silicon (Si): 0.2-0.8%
- Manganese (Mn): 0.4-1.0%
- Zinc (Zn): 0.25% max
- Titanium (Ti): 0.15% max
- Chromium (Cr): 0.04-0.35%
- Aluminum (Al): balance
Mechanical Properties:
The mechanical properties of aluminum 2017 vary depending on the heat treatment process. In general, it has excellent strength, toughness, and hardness. Here are some of the important properties:
- Ultimate Tensile Strength: 430 MPa
- Yield Strength: 390 MPa
- Hardness (Brinell): 120
- Elongation at Break: 12%
Applications of 2017 seamless aluminum tube
Aluminum 2017 seamless tubes have several applications in various industries. Some of the notable applications include:
- Aerospace: It is widely used in the aerospace industry to manufacture structural components. Its high strength-to-weight ratio makes it ideal for aircraft parts that require strength and durability.
- Transportation: Aluminum 2017 seamless tubes are used in the manufacturing of transportation systems such as trucks, buses, and trains. It is also used to produce bicycle frames and other lightweight vehicles.
- Marine: It is used in marine applications such as boat building, shipbuilding, and offshore structures. Its corrosion resistance properties make it ideal for these applications.
- Structural: Aluminum 2017 seamless tubes are used in the construction of building facades, bridges, and other architectural applications. Its high strength and lightweight properties make it an ideal material for such applications.
Conclusion:
Aluminum 2017 seamless tubes offer exceptional properties that make them ideal for various applications. They are highly resistant to corrosion, have high strength, and are lightweight. The chemical composition of aluminum 2017 consists of copper as the primary alloying element, which gives it higher strength and toughness. Its mechanical properties are impressive, with high tensile strength and elongation at break. In conclusion, Aluminum 2017 seamless tubes have a broad range of applications, including aerospace, transportation, marine, and structural industries.
